Search Results

…air film. Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. Reflectix® Insulation products are a group of technologically…

…provides an R-6.0 when installed with a 0.75” air gap between the duct and the insulation. There is a choice of three spacer configurations that create the required air space….

…systems. The product provides an R-8.0 when installed with a 0.75” air gap between the duct and the insulation, and R-6.0 when installed direct to the duct without a spacer….

…provides an R-6.0 when installed with a 0.75” air gap between the duct and the insulation. There is a choice of three spacer configurations that create the required air space….

R-3.7, R-7.0 and a Vapor/Moisture Barrier Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. The Do-It-Yourselfer has several…

Northern Zone of the USA – With Reflectix® Below the Mass Insulation: R-7.0 Summer & R-1.0 Winter and a Vapor/Moisture Barrier Southern Zone of the USA – With Reflectix® Above…

…to reduce the energy consumption of your customer’s water heater. Not only is Reflectix® quick and easy to install, it will pay for itself in as quickly as 9 months….

Inside the Girts Metal Interior: R-6.3 Open Interior: R-5.3 Outside the Girts Metal Interior: R-5.5 Open Interior: R-4.7 Note: Installation instructions and illustrated drawings are recommendations only, while proper local…

Inside the Girts Metal Interior: R-6.3 Open Interior: R-5.3 Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. Reflectix®…

…also by eliminating air flow into the back side of the batt (which reduces stated R-values). The third benefit addresses Radiant Heat Flow that the wall would ordinarily absorb (a…

Air and Moisture Barrier Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. Made from ribbed polyethylene foam, Reflectix®…

…of 1.32 UP and 4.55 DOWN for interior air film. Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer….

Metal Interior with a 3/4” Thermal Break: R-8.2 Open Interior with a 3/4” Thermal Break: R-6.0 Metal Interior with a Nominal 3/4” Drape in Product (No Thermal Break): R-5.9 Open…

…energy that ordinarily would be transmitted to the interior of the building is blocked. * Includes thermal resistance of 1.32 UP and 4.55 DOWN for interior air film. Note: Installation…

…ordinarily would be transmitted to the interior of the building is blocked. * Includes thermal resistance of 1.32 UP and 4.55 DOWN for interior air film. Note: Installation instructions and…

…resistance of 1.32 UP and 4.55 DOWN for interior air film. Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the…

“My kids joke that my hobbies are recycling and insulating, but it’s no joke!” — Ellen B., Albuquerque, NM —   Reflectix® Reflective/Bubble product excels in a wide variety of…

…provides an R-6.0 when installed with a 0.75” air gap between the duct and the insulation. There is a choice of three spacer configurations that create the required air space….

“My kids joke that my hobbies are recycling and insulating, but it’s no joke!” — Ellen B., Albuquerque, NM —   Reflectix® Reflective/Bubble product excels in a wide variety of…

Below the Purlins Open Interior R-6.4* Heat Flow Down | R-3.7* Heat Flow Up Above the Purlins Open Interior R-3.8* Heat Flow Down | R-3.5* Heat Flow Up Note: Installation…

Bottom of the Purlins Open Interior R-6.4* Heat Flow Down | R-3.7* Heat Flow Up Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are…

Bottom of the Trusses Open Interior R-6.6* Heat Flow Down | R-3.0* Heat Flow Up Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are…

…upgrading your attic system. When installed properly, a reduction of up to 10% in the home’s air conditioning usage can result. The products are clean, lightweight and easy to install….

R-4.5 Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. This application is a great option for the Do-It-Yourselfer…

Open Interior with 3/4” Thermal Breaks R-5.5* Heat Flow Down R-3.4* Heat Flow Up Open Interior without Thermal Breaks and a Nominal 3/4” Drape R-4.0* Heat Flow Down R-3.2* Heat…

Open Interior with 1”x 2” Furring R-7.5* Heat Flow Down R-3.6* Heat Flow Up Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the…

R-4.2 Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. Reflectix® Duct Insulation is an alternative to other types…

…choice when selecting insulation for round or rectangular ductwork in HVAC systems. The product provides an R-5.6 when installed with a 0.375” air gap between the duct and the insulation….

R-6.0 Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. Reflectix® Duct Insulation is an alternative to other types…

…the first choice when selecting insulation for outdoor round or rectangular ductwork. The product provides an R-5.6 when installed with a 0.375” air gap between the duct and the insulation….

…when selecting insulation for outdoor round or rectangular ductwork. The product provides an R-8.0 when installed with two 0.75” air gaps between the duct and two layers of the insulation….