Search Results

…garage door is the primary contributor to hot garage temperatures in the summer (specifically west and south facing doors). The product is very easy to handle and installs very cleanly….

…“RB”, “BP” or “ST” Product Code Prefixes Benefit: Radiant Barrier Application Webpage Close Duct Insulation with Spacer Product: “BP” or “DW” Product Code Prefixes Benefit: R-4.2 or R-6.0 with 0.75”…

…provides an R-6.0 when installed with a 0.75” air gap between the duct and the insulation. There is a choice of three spacer configurations that create the required air space….

…systems. The product provides an R-8.0 when installed with a 0.75” air gap between the duct and the insulation, and R-6.0 when installed direct to the duct without a spacer….

…product is the easiest (to handle) choice available. It comes in convenient roll sizes that install cleanly and quickly. The product is dust and fiber-free, and does not require any…

…crawl space insulation options. It comes in convenient roll sizes that install cleanly and quickly. The product is dust and fiber-free, and does not require any protective garments or respirators…

…provides an R-6.0 when installed with a 0.75” air gap between the duct and the insulation. There is a choice of three spacer configurations that create the required air space….

…when selecting insulation for outdoor round or rectangular ductwork. The product provides an R-8.0 when installed with two 0.75” air gaps between the duct and two layers of the insulation….

…product is the easiest (to handle) choice available. It comes in convenient roll sizes that install cleanly and quickly. The product is dust and fiber-free, and does not require any…

Reflectix® Insulation has options for the Post Frame Building Contractor. The “easy to install and handle” feature reduces the labor necessary to install, and provides an “itch free” installation experience….

Northern Zone of the USA – With Reflectix® Below the Mass Insulation: R-7.0 Summer & R-1.0 Winter and a Vapor/Moisture Barrier Southern Zone of the USA – With Reflectix® Above…

Northern Zone of the USA – With Reflectix® Below the Mass Insulation: R-7.0 Summer & R-1.0 Winter and a Vapor/Moisture Barrier Southern Zone of the USA – With Reflectix® Above…

…and corrugated aluminum panels for return air ducts. In wood frame construction, it may be used to enclose the bottom of return air plenums, between the joist spaces, stud cavities,…

…in the Southern Zone of the USA (due to the amount of AC usage). However, they will provide reduced heat gain into the home wherever they are installed. If you…

…in the Southern Zone of the USA (due to the amount of AC usage). However, they will provide reduced heat gain into the home wherever they are installed. If you…

…are recommended for installation in the Southern Zone of the USA (due to the amount of AC usage). However, they will provide reduced heat gain into the home wherever they…

…sheet metal for return air duct panning. It may be used to enclose the bottom of return air plenums, between the joist spaces, stud cavities, and wall and ceiling cavities….

R-16 and a Radiant Reflector (with R-13 Fiberglass Batt) R-19 and a Radiant Reflector (with R-13 Fiberglass Batt and 0.75” Furring (on Back of Knee Wall)) Note: Installation instructions and…

R-16 and a Radiant Reflector (with R-13 Fiberglass Batt) R-19 and a Radiant Reflector (with R-13 Fiberglass Batt and 0.75” Furring (on Back of Knee Wall)) Note: Installation instructions and…

R-1.1 Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. For the Do-It-Yourselfer, Reflectix® has an insulating product specifically…

R-1.1 Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. For the Do-It-Yourselfer, Reflectix® has an insulating product specifically…

R-4.2 Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. Reflectix® Duct Insulation is an alternative to other types…

…choice when selecting insulation for round or rectangular ductwork in HVAC systems. The product provides an R-5.6 when installed with a 0.375” air gap between the duct and the insulation….

R-6.0 Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer. Reflectix® Duct Insulation is an alternative to other types…

Inside the Girts Metal Interior: R-6.3 Open Interior: R-5.3 Outside the Girts Metal Interior: R-5.5 Open Interior: R-4.7 Note: Installation instructions and illustrated drawings are recommendations only, while proper local…